Preview
EPS2 24-10-Blue
Ejector Pin Special with an M24 thread.
Six pre-set models are available. Each model is color-coded for easy identification of force rating. If needed, these models can be re-charged or adjusted to meet individual force requirements.
A special model (black), which is delivered with a precharge of 5 to 10 bar, is also available and is intended for adjustment to the desired force.
Diagram / specifications section
Preview
| L min | Minimum Length (in) | 2.17 |
| S | Stroke Length (in) | 0.39 |
| L | Total Length (in) | 2.56 |
Item specifications
- Charging Pressure (Psi)580
- ColorEPS2 24 Blue
- End Force At Full Stroke (LBF)180
- Force Increase By Temperature Percent Per (°F)0.17
- Gas Volume (CuF)0.000176573
- Initial Force at max. pressure (lbf) 101
- Max Charging Pressure (Psi)2175
- Max Piston Rod Velocity (FtMin)314.96
- Max. Operating Temperature (F)176
- Min Charging Pressure (PSI)145
- Min. Operating Temperature (F)32
- Recommended Max Strokes Per Minute~30-80
- Weight (lb)0.308
