Preview
CU4 SP 1800-025
This is the CU4 spring with a Side Port plate (SP) for applications where a sideport is needed, for example in hose systems.
Springs with stroke lengths over 25 mm should always be attached to the tool, using a flange or the tapped holes in the bottom of the spring. We also recommend fixing of shorter stroke springs for optimal service life.
Diagram / specifications section
Preview
| L min | Minimum Length (mm) | 130 |
| S | Stroke Length (mm) | 25 |
| L | Total Length (mm) | 155 |
Item specifications
- End Force At Full Stroke (N)26000
- Force Increase By Temperature Percent Per (°C)0.3
- Gas volume (l)0.1
- Initial Force at max. pressure (N) 18000
- Max Charging Pressure (Bar)150
- Max Piston Rod Velocity (Ms)0.8
- Max. Operating Temperature (°C)80
- Min Charging Pressure (Bar)25
- Recommended Max Strokes Per Minute~ 100
- Weight (kg)0.93
