Why does not Cam Unit/Force Cylinder perform a full stroke?
Possible cause |
Measure taken |
1:1 Low gas pressure in the Accumulator |
Charge up the gas pressure (max 180 bar). Read how in the catalog. |
1:2 Power Cylinder does not perform a full stroke |
Adjust the stroke length. |
1:3 Oil leakage in Power Cylinder A: The port plug has come loose B: Damage on the seal and/or inside of the Power Cylinder |
A: Replace the plug and fill the system. Read how in the catalog. B: Contact your distributor for service or replacement cylinder. |
1:4 Oil leakage in Cam Unit A: The bleeding valve has come loose B: Damage on the seal and/or inside of the Cam Unit |
A: Replace the bleed valve and fill the system. Read how in the catalog. B: Contact your distributor for service or replacement of the Cam Unit. |
1:5 Hose or adapter has come loose or been damaged. |
Replace the defective parts and fill the system. Read how in the catalog. |