Series TX

The Power Line - Heavy Duty series is a crossover between the standard TU Series and the Power Line X Series.

These gas springs are available with forces from 7,400 N up to 200,000 N and stroke lengths between 13 and 300 mm. An upper C-groove, lower U-groove and bottom threaded holes allow various mounting possibilities using our standard mounts.

/globalassets/inriver/resources/imageimage/singleimagesingle-image/KALLER_TX_6600_prod.png

TX Models

Initial Force (N)

Cylinder Diameter (mm)

Stroke Length (mm)

Total Length (mm)

Models Available stroke lengths
(mm)
Initial force at max. pressure
(N)
Length equation Cylinder diameter
(Ø mm)
Min. charging pressure
(bar at 20°C)
Recommended max. strokes/min.
(at 20°C)
TX 750 13 - 200 7400 85 + (2 x Stroke) 45 25 ~15-100
TX 1000 13 - 300 9200 95 + (2 x Stroke) 50 25 ~50-100
TX 1500 13 - 300 15000 95 + (2 × Stroke) 63 25 ~15-100
TX 2400 25 - 300 24000 110 + (2 x Stroke) 75 25 ~40-100
TX 4200 25 - 300 42000 120 + (2 x Stroke) 95 25 ~40-100
TX 6600 25 - 300 66300 140 + (2 x Stroke) 120 25 ~30-100
TX 9500 25 - 300 95000 155 + (2 x Stroke) 150 25 ~30-100
TX 20000 25 - 300 200000 160 + 2 × Stroke) 195 25 ~15-100