The TEBEB counterbalance cylinders are cylinders with ears (with spherical plain bearings) both at the tube and on the piston rod and stroke lenght up till 300mm.
The cylinders are for counterbalance or if a holding forcec is needed, in various type of applications. The cylinders should always be built in and fixed both at the tube and piston rod side.
Note! The gas springs are not to be exposed to any pulling forces. If needed a mechanical stop must be installed to prevent this from happening.
|Min. operating temperature (°C)||0|
|Max. operating temperature (°C)||80|
|Force increase by temperature (%/ °C)||0.3|
|Max. piston rod velocity (m/s)||0.8|
|Tube surface||Paint, top coat black.|
Initial Force (N)
Cylinder Diameter (mm)
Stroke Length (mm)
Total Length (mm)
Available stroke lengths
Initial force at max. pressure
|Gas link system||Length equation||
|Min. charging pressure
(bar at 20°C)
|Recommended max. strokes/min.
|TEBEB 750||25 - 300||7400||No||120 + (2 x Stroke)||50||25||~15-40|
|TEBEB 1500||25 - 300||15000||No||145 + (2 x Stroke)||75||25||~15-40|
|TEBEB 3000||25 - 300||30000||No||160 + (2 x Stroke)||95||25||~15-40|
|TEBEB 5000||25 - 300||50000||No||195 + (2 x Stroke)||120||25||~15-40|