Series TEBT

The TEBT counterbalance cylinders are cylinders with an ear (with spherical plain bearing) on the tube and an attachment thread in the top of the piston rod and stroke lenght up till 300mm.

The cylinders are for counterbalance or if a holding forcec is needed, in various type of applications. The cylinders should always be built in and fixed both at the tube and piston rod side.

Note! The gas springs are not to be exposed to any pulling forces. If needed a mechanical stop must be installed to prevent this from happening.

/globalassets/inriver/resources/imageimage/singleimagesingle-image/kaller_tebt_1500_prod.png

TEBT Models

Initial Force (N)

Cylinder Diameter (mm)

Stroke Length (mm)

Total Length (mm)

Models Available stroke lengths Initial force at max. pressure Length equation Cylinder diameter Min. charging pressure Recommended max. strokes/min.
(mm) (N) (Ø mm) (bar at 20°C) (at 20°C)
TEBT 750 12.7 - 300 7400 120 + (2 x Stroke) 50 25 ~15-40
TEBT 1500 25 - 300 15000 145 + (2 x Stroke) 75 25 ~15-40
TEBT 3000 25 - 300 30000 160 + (2 x Stroke) 95 25 ~15-40
TEBT 5000 25 - 300 50000 195 + (2 x Stroke) 120 25 ~15-40