KALLER Speed Control™ -SPC Gas Springs
KALLER Speed Control™ -SPC Gas Springs, these new springs have been engineered to reduce or eliminate blank holder bounce.
|
Download ( kb)
|
Gas Spring Selection Guide
Selection Guide - a new brochure with a Gas Spring Selection Chart for easy guidance.
|
Download ( kb)
|
Controllable Gas Spring KF2, an introduction
Kaller controllable springs are a family of gas springs, for use in press tools, that can be locked in their bottom position and where the return stroke of the spring can be controlled.
|
Download ( kb)
|
Flex Cam, an introduction
Flex Cam, an introduction The Flex Cam is used for piercing, cutting, forming and flanging operations. The system allows for a flexible distribution of forces with optimal direction and velocity. By using a Flex Cam, fewer tools are required in production.
|
Download ( kb)
|
Stock Lifter product line, SLM 170, SLM 300 & SPC 800
The SLM 170, SLM 300 & SPC 800 are mainly for use in progression dies. These units have an extremely robust design that can withstand high side loading.
|
Download ( kb)
|
Flange Stripper LT, LW
Kaller Flange Stripper Unit is used in flanging dies for stripping/lifting a flanged part after forming. It provides 200 daN of stripping force, can be top or bottom mounted and is self guiding.
|
Download ( kb)
|
New! R12 Series
Introducing our smallest KALLER Gas Spring, the R12 series With stroke lengths from 7-125 mm and adjustable force from 6-50 daN. These colour coded Gas Springs are our smallest yet, with Ø 12 mm cylinder diameters.
|
Download ( kb)
|
New! R15 Series
New! R15 Series Introducing a new KALLER Gas Spring, the R15 series. With stroke lengths from 7-125 mm and adjustable force from 18-70 daN. These colour coded Gas Springs are with Ø 15 mm cylinder diameters.
|
Download ( kb)
|
New! EP2 16 and EP2 24/EPS2 24 Serie
The Next Generation of Ejector Pin, EP2 16 gas springs are available in both M16 x 1.5 thread sizes and M16 x 2 and EP2 24 gas springs are available in M24 x 1.5 thread size.
|
Download ( kb)
|
Power Line X Series
New! The Power Line gas springs are a serie available in 1700 N up to 20 000 N forces. These gas springs are our shortest, with more power to give you a great deal of force in a very small amount of space.
|
Download ( kb)
|
CU 420-18300 Series
Brochure on Super Compact family (CU), with diameters ranging from 25 mm to 150 mm.
|
Download ( kb)
|
SSP- Soft-hit Striker Plate
Soft-hit Striker Plate (SPP) hav been engineered to address three of the major problems that face metal stampers: - Excessive shock loads - High noise levels - Poor part quality
|
Download ( kb)
|
Gas Spring Service & Mantainence
Gas Spring Service & Mantainence - a brochure with a overview of all equipment for Gas Spring Service & Maintenance.
|
Download ( kb)
|
LCF ™ Force Manager ™
Brochure on our gas spring that reduces press maintenance, lowers noise levels, and increases production rates.
|
Download ( kb)
|
Micro Tube
Micro-TubeTM is a compact and flexible system for linking gas springs together, a tube system where all connections are soft sealed and self crimping. This ensures leak proof tube joints.
|
Download ( kb)
|
Power Line - Heavy Duty TX
Our new TX spring are a crossover between our classical TU Spring and our newer X Spring. The TX Spring combines the high forces from the X Spring with the outer dimensions and stroke lengths of the TU Serie.
|
Download ( kb)
|