Brochures English (PDF)
Show, edit or delete document KALLER Speed Control™ -SPC Gas Springs

KALLER Speed Control™ -SPC Gas Springs, these new springs have been engineered to reduce or eliminate blank holder bounce.

Download document
Download ( kb)
Show, edit or delete document R12 Series

Introducing our smallest KALLER Gas Spring, the R12 series With stroke lengths from 7-125 mm and adjustable force from 6-50 daN. These colour coded Gas Springs are our smallest yet, with Ø 12 mm cylinder diameters.

Download document
Download ( kb)
Show, edit or delete document R15 Series

New! R15 Series Introducing a new KALLER Gas Spring, the R15 series. With stroke lengths from 7-125 mm and adjustable force from 18-70 daN. These colour coded Gas Springs are with Ø 15 mm cylinder diameters.

Download document
Download ( kb)
Show, edit or delete document R19 Series

The R series get their name from the fact their tube is roll formed and therefore permanently closed, making them non-repairable. R series springs are available with Ø 12, Ø 15, and Ø 19 mm tube diameters and with stroke lengths up to 125 mm. There are 4 colour-coded models

Download document
Download ( kb)
Show, edit or delete document Power Line, XG 350 to XG 6600

The XG-series are short and our most powerful Piston Rod Sealed gas springs

Download document
Download ( kb)
Show, edit or delete document LCF ™ Force Manager ™

Brochure on our gas spring that reduces press maintenance, lowers noise levels, and increases production rates.

Download document
Download ( kb)
Show, edit or delete document MT Series

Mould Temp gas springs have been engineered to withstand higher working temperatures, like those commonly associated with plastic moulding tools. Mould Temp gas springs are compact and powerful piston rod sealed gas springs, which can be used at working temperatures up to 120°C.
Download document
Download ( kb)
Show, edit or delete document High Speed Series, TUS 750 to TUS 7500

The TUS series is designed to meet one of the demands facing the metal forming industry today, increasing press speeds.

Download document
Download ( kb)
Show, edit or delete document Micro EO24

Micro EO24TM Hose and Tube Systemis our most compact, soft sealed gas linking system.

Download document
Download ( kb)
Show, edit or delete document Flex Form

Flex Form offers an excellent control system both for movement and forces.
Download document
Download ( kb)
Show, edit or delete document The Safer Choice

At KALLER, safety has always been a top priority. This is a guide to help you provide the safer working environment.
Download document
Download ( kb)
Show, edit or delete document EP3 16, EP2 24 and EPS2 24 Series

Next generation Ejector Pin, EP3 16 gas springs, is available in both M16 x 1.5 thread sizes. M16 x 2 and EP2 24 gas springs are available in M24 x 1.5 thread size.
Download document
Download ( kb)
Show, edit or delete document Low Height Series

The TL series ranges from model sizes 750 to 5000 with the same features and technology as the TU series.

Download document
Download ( kb)
Show, edit or delete document Stock Lifters SLME 170, SLMT 170, SLM 300, SPC 800

Stocklifters SLME 170, SLMT 170, SLM 300, SPC 800 are mainly for use in progression dies. These units have an extremely robust design that can withstand high side loading.
Download document
Download ( kb)
Show, edit or delete document Flange Stripper LT, LW

Kaller Flange Stripper Unit is used in flanging dies for stripping/lifting a flanged part after forming. It provides 200 daN of stripping force, can be top or bottom mounted and is self guiding.

Download document
Download ( kb)
Show, edit or delete document Power Line X Series

The Power Line Gas Springs is a series available in 1,700 N up to 20,000 N forces. These gas springs are our shortest, with more power to give you a great deal of force in a very small amount of space.

Download document
Download ( kb)
Show, edit or delete document Flex Cam

Flex Cam is used for piercing, cutting, forming and flanging operations. The system allows for a flexible distribution of forces with optimal direction and velocity. By using a Flex Cam, fewer tools are required in production.

Download document
Download ( kb)
Show, edit or delete document Controllable Gas Spring KF2, an introduction

Kaller controllable springs are a family of gas springs, for use in press tools, that can be locked in their bottom position and where the return stroke of the spring can be controlled.

Download document
Download ( kb)
Show, edit or delete document Gas Spring Service & Mantainance

Gas Spring Service & Mantainence - a brochure with a overview of all equipment for Gas Spring Service & Maintenance.
Download document
Download ( kb)
Show, edit or delete document SSP - Soft-hit Striker Plate

Soft-hit Striker Plate (SPP) have been engineered to address three of the major problems that face metal stampers: - Excessive shock loads - High noise levels - Poor part quality

Download document
Download ( kb)
Show, edit or delete document Super Compact CU4 420 – CU4 18300

CU4 gas springs are very compact bore-sealed springs, which provide the highest force per cylinder diameter. These gas springs are ideal where space is limited in the die and very high forces are required.

Download document
Download ( kb)
Show, edit or delete document CU4 Appendix

Super Compact CU4 420 – CU4 18300 – the new generation compact gas springs CU4
Download document
Download ( kb)
Show, edit or delete document Flange Strippers LTP, LWP, SLMTS

A Flange Stripper is a stripper that pushes against the bottom edge or surface of a flange to release the part from the tool.

Download document
Download ( kb)
Show, edit or delete document Dual Post Lifters - DPL

KALLER Dual Post Lifters, DPL 90 and DPL 200, can be used in progressive dies for lifting the stock when it progresses through the die.
Download document
Download ( kb)
Show, edit or delete document Power Line Heavy Duty TX 750 – TX 20000

TX springs combine the high forces of the X springs with the outer dimensions and stroke lengths of the TU springs.
Download document
Download ( kb)
Show, edit or delete document Pressure Tank

Pressure Tanks are used together with the EO24-Hose system (or its equivalent) in applications where a low pressure/force build-up in the Hose System is advantageous (e.g. for deep draw tooling applications).
Download document
Download ( kb)
Show, edit or delete document Gas Spring Mounting Guidelines

KALLER gas springs are engineered for use in modern day, metal stamping dies and plastic moulding tools. Over the years, KALLER has developed a wide range of mounting methods for the gas springs. The following is intended as a reminder of the correct procedure when using these various mounting methods.
Download document
Download ( kb)
Show, edit or delete document Power Line Heavy Duty

KALLER is now launching three additional models in the Power Line Heavy Duty TX gas spring series, the TX 750, TX 1500 and TX 20000.
Download document
Download ( kb)
Show, edit or delete document Gas Spring Selection Guide

Selection Guide - a brochure with a Gas Spring Selection chart for easy guidance.

Download document
Download ( kb)
Show, edit or delete document Compact Xtreme CX 500-CX 1900

Using the KALLER Compact Xtreme CX gas spring series is an excellent way to achieve more cost efficient dies. The CX gas springs consists of piston rod sealed gas springs, similar to the KALLER Power Line X series.
Download document
Download ( kb)
Show, edit or delete document Roller Cams product line, RC2 and RCP2

These new Roller Cam units offer improved performance for off-centre loads, have built in stroke dampening and provide high precision and maintenance free guiding for 30 kN, 50 kN and 150 kN piercing forces.

Download document
Download ( kb)
Show, edit or delete document KALLER Hose-less Baseplate

KALLER Hose-less Baseplate is the increasingly popular easy-accessible alternative to the conventional hosed plate systems on the market.

Download document
Download ( kb)
Show, edit or delete document Introducing the updated Die Separation gas spring

Using the DS springs is an excellent way to avoid unnecessary wear of the die, press and gas springs.

Download document
Download ( kb)

KALLER Brochures are in pdf format and can be viewed and printed with Adobe Acrobat Reader™. Click download for your free copy of the latest version of Adobe Acrobat Reader.